Accent L4-1.6L (2003)
NOTE: When the bellows are installed, a new band must be used.
17. Install the bellows in position, taking care not to twist it.
18. Fill the dust cover inner side and lip with the specified grease, and fix the dust cover in position with the clip ring attached in the groove of the tie
rod end.
Recommended grease
A:.....................................POLY Lug GLY 801 K or equivalent
B:..................................SHOWA SUNLIGHT MB2 or equivalent
Dust cover inner side and lip:..........................THREE BOND
19. Install the tie rod to the tie rod end.
