Accent L4-1.6L (2003)
SENSOR INPUTS TO TCM:
The sensor inputs to the TCM can be checked by selecting:
^
"Hyundai Vehicle Diagnosis" menu
^
"Automatic Transaxle" menu "Current Data" menu
If you wish to show the sensor data as a graph:
^
From the "Automatic Transaxle" menu, select "Current Data" menu
^
Highlight the desired sensor and select "FIX" (F1). Repeat for an additional sensor, if desired.
^
Select "GRPH" (F5).
If you wish to record the graphed data:
^
From the "Automatic Transaxle" menu, select "Flight Record" menu
^
Highlight the desired sensor and select "FIX" (F1). Repeat for an additional sensor, if desired.
^
Select "RCRD" (F6)
^
Select "TRIG" (F5) to begin recording
^
Select "END" (F6) to stop recording
^
Select "GRPH" (F1)
