Accent L4-1.6L (2003)
8.
Move the shift lever to the N position. Attach the shift cable to the lever and install the nut. Tighten the nut to specification.
Specification: 9-10 ft.lb (12-13 Nm, 120-130 kg.cm)
Remove the 5 mm drill or M5 bolt.
VERIFY THE SIGNAL FROM THE RANGE SWITCH:
9.
Attach a Hi-Scan Pro and select:
^
"Hyundai Vehicle Diagnosis"
^
Vehicle
^
"Automatic Transaxle" menu
^
"Current Data" menu
^
"Select Lever Switch" and "Shift Position":
10.
Move the shift lever to Reverse.
^
Monitor "Select Lever Switch".
^
If "R" is displayed, the TCM is receiving the correct signal from the range switch. Go to Step 11.
