Accent L4-1.6L (2003)
Transmission Cooler: Technical Service Bulletins
A/T - Cooler Flushing Procedure
Group: TRANSAXLE
Number: 07-40-011
Date: AUGUST, 2007
Model:
ALL
Subject:
AUTOMATIC TRANSAXLE OIL COOLER FLUSHING
This bulletin revises TSB 98-40-004 to update use of alternate oil cooler flushers
DESCRIPTION
Whenever an automatic transaxle is replaced or overhauled, the oil cooler must be flushed to remove contaminants such as metal particles and clutch
material. Improper flushing may result in severe damage to the replacement transaxle.
SERVICE PROCEDURE
WARNING:
^
Wear safety glasses and rubber gloves when flushing the oil cooler.
^
Use aerosol oil cooler flush only with adequate ventilation.
^
Avoid contact with eyes and skin.
^
Do not breathe vapors or spray mist.
1.
Mark the hoses with tape or tags so they can be reconnected correctly. Disconnect the oil cooler inlet and outlet hoses from the oil cooler tubes.
