Accent L4-1.6L (2003)
Transmission Position Switch/Sensor: All Technical Service Bulletins
A/T Controls - Neutral Position Switch Adaptive Relearn
Resetting Adaptive Learning and
Range Switch Neutral Position
Learning
If the transaxle or transaxle control unit is replaced, the TCU adaptive learning values must be reset (erased) and the range switch neutral position must
be relearned using either the GDS or Hi-Scan Pro. If the following procedures are not completed, the following conditions may occur:
I.
RESET ADAPTIVE LEARNING:
^
Stop the vehicle, move the shift lever to "P" and set the parking brake.
^
Turn the ignition switch "ON" (engine off).
^
Attach the GDS or Hi-Scan Pro.
Reset Transaxle Adaptive Values(GDS):
Follow the instructions on the screen and confirm the test indicates "Completed:"
Reset Transaxie Adaptive Values (Hi-Scan):
