Accent L4-1.6L (2003)
6. If the clutch pedal height is not within the standard value range, adjust as follows:
^
Turn and adjust the bolt, then secure by tightening the lock nut
CAUTION: After the adjustment, tighten the bolt anti/ it reaches the pedal stopper and tighten the lock nut
^
Turn the push rod to agree with the standard value and secure the push rod with the lock nut.
CAUTION: When adjusting the clutch pedal height, be careful not to push me push rod toward the master cylinder.
7. After completing the adjustments, check that the clutch pedal free play (measured at the face of the pedal pad) is within the standard value ranges.
Standard value: (B) 6 - 13 mm (0.24 - 0.52 inch)
8. If the clutch pedal free play does not meet the standard value, it may be the result of air in the hydraulic system or a faulty clutch master cylinder.
Bleed the air or disassemble and inspect the master cylinder or clutch.
IGNITION LOCK SWITCH INSPECTION
