Accent L4-1.6L (2003)
Rear Door Window Regulator: Service and Repair
1. Remove the rear door trim, door trim seal.
2. Carefully move the glass by the power window switch until the 2 mounting bolts appear, then remove them.
3. Remove 6 regulator assembly mounting nuts, and remove the regulator assembly.
TORQUE : 8 - 12 Nm (80 - 120 kgcm, 6 - 9 lb-ft)
4. Remove the glass run from the channel.
5. After loosening the screw attaching the upper channel, remove the channel.
6. Installation is the reverse of removal.