Accent GL Sedan L4-1495cc 1.5L SOHC MFI (1997)
If the torsion bars do not match, compare the torsion bar removed from the vehicle to the remaining torsion bar in the Spoiler Kit. The torsion bar will
match one or the other. Install the matching torsion bar from the Spoiler Kit.
4.
Remove the other torsion bar from the vehicle and install the remaining torsion bar from the Spoiler Kit.
SPOILER KIT INSTALLATION QUALITY CHECK:
Perform the following quality check on Accent 4-door vehicles onto which Spoiler Kits were previously installed:
A.
Open rear deck lid.
B.
Place deck lid in its fully open position.
C.
The rear deck lid should remain in the fully open position by itself.
D.
If the deck lid does not remain in the fully open position but closes on its own accord, remove the torsion bars and reverse their location.
If the deck-lid stays in its fully open position without closing on its own accord, the torsion bars are installed correctly and no other modification is
necessary.
