Accent GL Sedan L4-1495cc 1.5L SOHC MFI (1997)
Brake Caliper: Service and Repair
Front
REMOVAL
1. Remove the wheel and tire.
2. Disconnect the brake hose.
NOTE: Plug the brake hose, not allow brake fluid to run out.
3. Remove the cylinder mounting bolt.
4. Remove cylinder and pads.
5. Remove the caliper mounting bolts (2EA) from knuckle.
6. Remove the carrier.
INSTALLATION
Installation is in reverse order of removal, noting the following:
-
Do not apply grease to the disc or pads.
-
Torque sliding pin to: 35-45 Nm (26-33 ft. lbs.)
-
Torque sliding bolt to: 22-31 Nm (16-24 ft. lbs.)
-
Torque carrier mounting bolt to: 65-75 Nm (48-55 ft. lbs.)
-
Torque brake hose bolt to: 25-29 Nm (18-22 ft. lbs.)
