Accent GL Sedan L4-1495cc 1.5L SOHC MFI (1997)
4. Before assembling the wheel cylinder, inspect the following points.
-
Check the cylinder and piston for wear, damage and rust.
-
Check the cylinder body for damage and cracks.
-
Check the contact surface of the piston and shoes for wear.
-
Check the piston spring for looseness.
5. Assembly is the reverse of the removal procedure, noting the following:
a. Clean the cylinder and inner part with isopropyl alcohol before assembly.
b. Apply brake fluid to piston cups and cylinder.
c. Be sure to use new piston cups and dust boots.
CAUTION: Be careful not to lose the steel ball in the bleeder.
INSTALLATION
Installation is in reverse order of removal, noting the following:
-
Bleed brake system. See: Brake Bleeding/Service and Repair
