Accent GL Sedan L4-1495cc 1.5L SOHC MFI (1997)
13. Remove the main crash pad assembly.
14. Disconnect cables from the heater unit and the thermostatic switch connector from the evaporator unit.
15. Disconnect other remnant connectors (If exist).
16. Remove the main crash pad assembly.
17. Remove 3 evaporator mounting bolts (or nuts).
18. Remove the evaporator unit.
19. Remove 3 mounting bolts from the heater unit.
20. Remove the heater unit.
INSTALLATION
1. Installation is the reverse of removal procedures.
2. After installation of the heater unit, check that the air mix lever slides smoothly, the full stroke right to left. If not okay, readjust the air mix cable.
