Accent GL Sedan L4-1495cc 1.5L SOHC MFI (1997)
1. Install the rocker arm shaft to the cylinder head, then tighten the rocker arm shaft mounting bolts to 20-27 Nm (200-270 kg. cm., 14-20 ft. lbs.).
2. When installing the rocker arms, shafts, and springs, note the difference between the A and B type rocker arms, and exhaust side needs only A type
rocker arms.
3. Install the rocker cover and tighten the bolts to 8-10 Nm (80-100 kg. cm., 5.9-7.4 ft. lbs.).
NOTE:
-
Sealant must be applied to top surface of cylinder head and cam cap and area of application is shown in figure.
-
The proper amount of sealant must be used to prevent the sealant from pushing excessive amounts.
-
Use sealant Three bond No.1212D aluminum color or equivalent.
4. Install the timing belt cover, tighten the cover bolts to 10-12 Nm (100-120 kg. cm., 7.2-8.7 ft. lbs.).
5. Install the air cleaner.
6. Install the breather hose and PCV hose.