Accent GL Sedan L4-1495cc 1.5L SOHC MFI (1997)
6.
Disconnect the upper radiator hose at the radiator end and move the hose out of the way.
7.
Disconnect the wiring for the passenger side radiator fan unit. Remove the passenger side fan unit by removing the two upper bolts (M6) and
loosening (do not remove all the way) the two lower bolts (M6).
8.
Remove the three (M8) bolts holding the exhaust manifold heat shield in place.
Note: During installation (M8: torque to 13 lb.ft 17.6 Nm)
CAUTION: Do not attempt to remove the heat shield. The bolts are removed to gain access to the exhaust manifold nuts.
TIP: Squirt some Hyundai Rust Penetrant (P/N 00232-12150) or equivalent on the bolts to ease the removal process and lessen the possibility of
damaging the fastener.
9.
Disconnect the upper oxygen sensor wiring connector.