Accent GL Sedan L4-1495cc 1.5L SOHC MFI (1997)
Piston Ring: Service and Repair
1. Install the oil control ring spacer.
2. Install oil control ring upper side rail.
-
To install side rail, first put one end of side rail between piston ring groove and spacer, hold it down firmly, then press down the portion to be
insert with your finger into groove as illustrated.
NOTE: Do not use piston ring expander when installing side rail.
3. Install oil control ring lower side rail by same procedure as above.
4. Using a suitable piston ring expander, install No.2 piston ring.
5. Using a suitable piston ring expander, install No.1 piston ring.
7. Position each piston ring end gap as far apart from neighboring gaps as possible.
-
Make sure that gaps are not positioned in side rail thrust and pin directions.
