Accent GL Sedan L4-1495cc 1.5L SOHC MFI (1997)
Valve: Service and Repair
REMOVAL
1. Using valve spring remover and installer tool No. 09222-28100 with 09222-28000, or equivalent, compress the spring
2. Remove the retainer locks, then releasing the tool, remove spring retainer, spring and valve.
3. Using suitable pliers, remove the valve seal, then the spring seat.
INSTALLATION
NOTE:
-
Clean each part before assembly.
-
Apply engine oil to sliding and rotating parts.
1. Ensure spring seat and valve guide seals are correctly installed.
2. Apply engine oil to each valve, then insert the valves into the valve guides.
-
Avoid using force when inserting the valve into the seal.
-
After insertion, check to see if the valve moves smoothly.
