Accent GL Sedan L4-1495cc 1.5L SOHC MFI (1997)
Valve Guide Seal: Service and Repair
1. After installing the spring seat, fit the stem seal on to the valve guide.
2. To install, fit the seal in by lightly tapping the valve stem oil seal installer tool No. 09222-22000, or equivalent.
NOTE:
-
The seal is installed in the specified position by means of the special tool.
-
Incorrect installation of the seal will adversely effect the lip I.D.and eccentricity, resulting in oil leaking down the valve guides.
-
Therefore, when installing, be careful not to twist the seal.
-
Do not reuse old stem seals.
