Accent GL Sedan L4-1495cc 1.5L SOHC MFI (1997)
Turn Signal Flasher: Testing and Inspection
FLASHER UNIT
GENERAL TEST
1. Remove the flasher unit from the relay box in passenger compartment.
2. Connect the positive (+) lead from the battery to terminal B and the negative (-) lead to terminal E.
3. Connect the two turn signal lamps parallel to each other to terminal L and E, check that the bulbs turn on and off.
NOTE: The turn signal lamps should flash 60 to 120 times per minute. It one of the front or rear turn signal lamps has an open circuit, the number
of flashes will be more than 120 per minute. If the operation is not as specified, replace the flasher unit.