Accent GL Sedan L4-1495cc 1.5L SOHC MFI (1997)
DTC P0335, P0336 - Crankshaft Position Sensor
TROUBLESHOOTING PROCEDURES
TROUBLESHOOTING HINTS
1. If unexpected misses are felt during driving or the engine stalls suddenly, shake the crankshaft position sensor harness. If this causes the engine to
stall, check for poor contact at the sensor connector.
2. If the tachometer reads 0 rpm when the engine is cranked, check for faulty crankshaft position sensor or ignition system problems.
3. If the tachometer reads 0 rpm when the engine is cranked and it does not start, ignition coil, power TR, or an ECM defect can be considered.
4. Engine can be stalled when the crankshaft position sensor cable is close to the high voltage cable due to the electronic noise caused by the high
voltage induced.
