hyundai Workshop Repair Guides

Hyundai Workshop Service and Repair Manuals

Disassembly and Reassembly|Page 9282 > < Disassembly and Reassembly|Page 9280
Page 7
background image

POSITIVE RECTIFIER TEST

Check for continuity between the positive rectifier and stator coil lead connection terminal with an ohmmeter. The ohmmeter should read continuity in
only on direction. If there is continuity in both directions, a diode is shorted.
Replace the rectifier assembly.

NEGATIVE RECTIFIER TEST

Check for continuity between the negative rectifier and the stator coil lead connection terminal. The ohmmeter should read continuity in only one
direction. If there is continuity in both directions, a diode is shorted, and the rectifier assembly must be replaced.

DIODE TRIO TEST

Check the three diodes for continuity by connecting and ohmmeter to both ends of each diode. Each diode should have continuity in only one direction.
If continuity is present in both directions, a diode is defective and the heatsink assembly must be replaced.

BRUSH REPLACEMENT

Replace the brushes it they are worn to limit line.

Disassembly and Reassembly|Page 9282 > < Disassembly and Reassembly|Page 9280