Accent GL Sedan L4-1495cc 1.5L SOHC MFI (1997)
Power Steering Pump: Testing and Inspection
1. Disconnect the pressure hose from the oil pump. Connect the special tool between the oil pump and pressure hose as illustrated.
2. Bleed the air, and then start the engine and turn the steering wheel several times so that the fluid temperature rises to approximately 50°C (122°F).
3. Increase the engine speed to 1,000 rpm.
4. Close the shut-valve of the special tool and measure the fluid pressure to confirm that it is within the standard value range. The oil pump pressure
[Standard value] should be 6.2 kPa (924 psi)
CAUTION: Do not keep the shut-off valve on the pressure gauge closed for no more than ten seconds.
5. Remove the special tools, and tighten the pressure hose to 55-60 Nm (41-44 ft. lbs.).
6. Bleed the system.
