Accent GL Sedan L4-1495cc 1.5L SOHC MFI (1997)
10. Remove the snap ring using snap ring pliers.
11. Drive out the pulley shaft with the bearing. If necessary, use plastic hammer.
12. Remove the oil seal from the oil pump body.
NOTE: When assembling, use a new oil seal.
13. Remove the guide bracket and nut.
14. Remove the connector from the oil pump body, and take out the flow control valve and the flow control spring.
15. Remove the O-ring from the connector.
CAUTION: Do not disassemble the flow control valve.
16. Remove the oil pump switch.
17. Take out the spring and the spool.
18. Remove the O-ring from the oil pump switch.
INSPECTION
1. Clean all disassembled parts with a suitable cleaning solvent.
2. If any inside parts of the oil pump have been damaged, replace the pump as an assembly.
3. If the pulley is cracked or deformed, replace it.
4. If oil leaks around the pulley shaft oil seal, replace the oil seal.
5. If the serrations of the pulley or pulley shaft are deformed or worn, replace them.
