Accent GL Sedan L4-1495cc 1.5L SOHC MFI (1997)
7. Disconnect the drive shaft from the hub using the special tool.
8. Remove the hub and knuckle as an assembly from the strut.
INSPECTION
1. Check the hub for cracks and the splines for wear.
2. Check the oil seal for cracking or damage.
3. Check the brake disc for scoring and damage.
4. Check the steering knuckle for cracks.
5. Check for a defective bearing.
BEARING REPLACEMENT
1. Install the special tools as illustrated.
2. Remove the hub from the knuckle by turning the special tool.
CAUTION:
a. Be sure to use the special tool.
b. If the hub and knuckle are disassembled by striking with a hammer, the bearing will be damaged.
3. Secure the knuckle in a vise.
4. Remove the brake disc from the hub.
