Accent GL Sedan L4-1495cc 1.5L SOHC MFI (1997)
Differential: Service and Repair
DISASSEMBLY
1. Remove the drive gear retaining bolts and drive gear from the differential case.
2. Remove the bearing with the special tool (09433-21000) or equivalent.
3. Drive out the lock pin with a punch inserted in hole "A".
4. Remove the pinion shaft, pinion gears and washers.
5. Remove the side gears and spacers. Do not mix the gears and spacers between the left and right sides.
ASSEMBLY
1. With the spacers installed on the back of the differential side gears, install the gears into the differential case. If reusing parts, install them in their
original positions noted during disassembly. If using new differential side gears, install medium thickness spacers 1.0 mm (O.O39 inch).
2. Install the washers on the back of the pinion gears. Install gears into the differential case, then insert the pinion shaft.
