Accent GL Sedan L4-1495cc 1.5L SOHC MFI (1997)
1. Check the clutch gear teeth for damage.
2. Check the internal surface for damage, wear or broken grooves.
3. Push the synchronizer ring toward the clutch gear and check clearance "A". Replace if it is not within specifications.
Limit: 0.5 mm (0.02 inch).
Synchronizer Sleeve and Hub
1. Install the synchronizer sleeve on the hub and check that it slides smoothly.
2. Check that the sleeve is free from damage.
3. Check for wear of the hub end surfaces (in contact with each gear).
CAUTION: Replace the synchronizer hub and sleeve as a set.
Synchronizer Key and Spring
1. Check for wear of the synchronizer key center protrusion.
2. Check the spring for weakness, distortion or damage.
