Accent GSI Coupe L4-1495cc 1.5L DOHC MFI (1998)
Brake Master Cylinder: Service and Repair
DISASSEMBLY
1. Remove the fluid level warning device connector.
2. Disconnect the brake lines from the master cylinder, and plug the open ports.
CAUTION: Do not allow brake fluid to remain on a painted surface. Wash it off immediately.
3. Remove the master cylinder mounting nuts. Disconnect the proportioning valve mounting bracket, then lift out the master cylinder.
4. Remove the reservoir cap and drain the brake fluid into a suitable container.
5. Remove the reservoir from the master cylinder.
NOTE: If necessary, support the master cylinder in a vise at its flange not at its bore.
6. While depressing the piston, remove the snap ring.
