hyundai Workshop Repair Guides

Hyundai Workshop Service and Repair Manuals

Parking Brake Cable|Adjustments|Page 8626 > < Brakes - Drum Brake Wheel Cylinder Leakage Inspection|Page 8621
Page 1
background image

Parking Brake Cable: Adjustments

STROKE ADJUSTMENT

1. Pull the brake lever with a force of approximately 196 N (20 kg, 44 lbs.), and count the number of clicks.

Parking brake lever stroke [Standard value]: 6 - 7 clicks.

2. If the number of notches is not within the standard value, adjust the cable length with the adjusting nut of the equalizer.
3. The indicator light will go out when the brake lever is fully released, and will light with the lever is pulled up one notch. If it does not operate,

replace it. 

4. After the adjustment, check that the rear brakes do not drag with the parking brake lever released.

Parking Brake Cable|Adjustments|Page 8626 > < Brakes - Drum Brake Wheel Cylinder Leakage Inspection|Page 8621