Accent GT Coupe L4-1495cc 1.5L DOHC MFI (1997)
1. Install the outer and inner gears into the front case.
-
Make sure that the inner and outer gears are installed in the same direction as shown.
2. Install the oil pump cover and tighten the bolts to 6-9 Nm (60-90 kg. cm., 4.5-6.6 ft. lbs.).
-
After the bolts have been tightened, check to ensure that the gear turns smoothly.
3. Install the relief valve and spring, tighten to 40-50 Nm (400-500 kg. cm., 29-36 ft. lbs.).
NOTE: Apply engine oil to the relief valve.