Accent GT Coupe L4-1495cc 1.5L DOHC MFI (1997)
Piston: Service and Repair
REMOVAL
NOTE: Keep the bearings in order with their corresponding connecting rods (according to cylinder numbers) for proper reassembly.
1. Remove the connecting rod cap nuts, then remove the caps and the big end lower bearing.
2. Push each piston connecting rod assembly toward the top of the cylinder and out of the block.
3. Use the piston pin fixture tool No. 09234-33001, or equivalent, to disassemble and reassemble the piston and connecting rod.
4. Place the proper insert in the fork of the tool.
-
Insert the position between the connecting rod and the piston.
