Accent GT Coupe L4-1495cc 1.5L DOHC MFI (1997)
2. Remove the Intake air hose connected to the throttle body.
3. Remove the accelerator cable.
4. Remove the P.C.V.hose and brake booster vacuum hoses.
5. Disconnect the vacuum hose connections.
6. Disconnect the high pressure fuel hose connection after relieving pressure in the fuel pipe line to prevent fuel overflow.
7. Remove the surge tank stay.
8. Remove the surge tank assembly and gasket.
9. Disconnect the fuel injector harness connector.
10. Remove the delivery pipe with the fuel injectors and pressure regulator attached.
NOTE: Be careful not to drop the injectors when removing the delivery pipe.
11. Remove the insulator from the intake manifold and disconnect the heater hose.
12. Remove the intake manifold.
INSTALLATION
Installation is the reverse of removal, noting the following information.
-
Install the delivery pipe with the fuel injectors and pressure regulator attached.
NOTE: Be careful not to drop the injectors when removing the delivery pipe.
-
Ensure that insulators are correctly inserted into the delivery pipe hole.
-
Tighten nuts and bolts as follows:
Throttle Body to surge tank: 15-20 Nm (150-200 kg. cm., 11-15 ft. lbs.).
Delivery pipe to manifold: 10-15 Nm (100-150 kg. cm., 7-11 ft. lbs.).
Surge tank to manifold: 10-15 Nm (100-150 kg. cm., 7-11 ft. lbs.).
Manifold to cylinder head: 10-15 Nm (100-150 kg. cm., 7-11 ft. lbs.).
