hyundai Workshop Repair Guides

Hyundai Workshop Service and Repair Manuals

Throttle Body > < Engine/Transmission Controls - Service Manual Revisions|Page 5181
Page 3
background image

DTC P0121 - Throttle Position Sensor

TROUBLESHOOTING PROCEDURES 

TROUBLESHOOTING HINTS 

1. The TPS signal is important in the control of the automatic transaxle. Shift shock and other troubles will occur if the sensor is faulty.
2. If the idle condition or accelerating is abnormal, check the TPS connector. (When the TPS connector is not connected properly, the current data

can show that the idle state remains off, though the accelerator pedal is released. And it results in improper idle or accelerating.)

3. Input voltage from throttle position sensor is below 0.1V or above 4.7V when ignition switch is turned on.

USING VOLTMETER

Throttle Body > < Engine/Transmission Controls - Service Manual Revisions|Page 5181