Accent GT Coupe L4-1495cc 1.5L DOHC MFI (1997)
CAUTION: Always use a new bearing.
6. Apply the specified oil, automatic transaxle fluid DEXRON II to the entire surface of the rack bushing oil seal.
7. Install the oil seal in the rack bushing.
8. Apply the specified oil, multipurpose grease SAE J310, NLGI No.2 to the entire surface of the O-ring and install it in the rack bushing.
9. Apply the specified grease, multipurpose grease SAE J310, NLGI No.2 to the rack teeth and wrap with vinyl tape.
CAUTION: Do not plug the vent hole in the rack with grease.
10. Insert the rack into the gear housing, then install the rack bushing and rack stopper.
11. Push in the rack stopper until the circlip groove of the rack stopper is aligned with the notched hole of the rack housing.lnstall the circlip while
turning the rack stopper.
CAUTION: The circlip should not be visible through the notched hole of the rack housing.
12. Using the (09432-21600) special tool, install the oil seal and the ball bearing in the valve body.
