Accent GT Coupe L4-1495cc 1.5L DOHC MFI (1997)
Tie Rod End: Testing and Inspection
CHECKING TIE ROD END BALL JOINT STARTING TORQUE
1. Mount two nuts on the ball joint, and then measure the starting torque. The tie rod end ball joint starting torque [Standard value] should be 0.5-2.5
Nm (4.3-21.7 inch lbs.).
2. If the starting torque exceeds the standard value, replace the tie rod end.
NOTE: Even if the starting torque is below limit of the standard value, the ball joint may be reused unless it has drag and excessive play.
