Accent GT Coupe L4-1495cc 1.5L DOHC MFI (1997)
2. Install the center member assembly.
3. Temporarily tighten the front roll stopper bracket bolt. After the total weight of the engine has been placed on the vehicle body, securely tighten
the nut. Tighten these member bolts as follows. Tighten the center member mounting bolt to 60-80 Nm (43-58 ft. lbs.), the front roll stopper
bracket to center member bolt to 30-40 Nm (22-29 ft. lbs.), the rear roll stopper bracket to center member bolt to 30-40 Nm (22-29 ft. lbs.), and
the insulator to engine mounting bracket bolts to 45-60 Nm (33-43 ft. lbs.).
