Accent GT Coupe L4-1495cc 1.5L DOHC MFI (1997)
9. Install the bearing outer race into the knuckle with Special Tools (09500-21000, 09517-21000, 09517-21200) or equivalents.
10. Install the disc to the hub, and torque to specification.
Disc to hub: 50-60 Nm (37-44 ft. lbs.).
11. Apply the specified multipurpose grease to the bearings and inside surface of the hub.
12. Place the outside bearing inner race into the knuckle.
13. Drive the oil seal (hub side) into the knuckle with the special tools.
14. Apply the specified multipurpose grease to the lip of the oil seal and to the surfaces of the oil seal which contact the hub.
Recommended Grease: SAE J310a, multipurpose grease NLGI No. 2 or equivalent.
15. Place the inner bearing into the knuckle.
16. Tighten the hub to the knuckle to 230 Nm (167 ft. lbs.) with the Special Tool (09517-21500) or equivalent.
17. Rotate the hub to seat the bearing.
