Accent GT Coupe L4-1495cc 1.5L DOHC MFI (1997)
8. Remove the snap ring and the oil seal from the oil pump drive gear.
INSPECTION
1. Measure the side clearance of the oil pump gear. If the clearance exceeds the standard value, or if an inspection of the surface area (of the oil pump
housing) that contacts the oil pump gear reveals indications of interference, replace the entire oil pump assembly.
Standard value: 0.02-0.048 mm (0.0008-0.0019 inch).
2. Check the surface of the reaction shaft support that contacts the oil pump gear. If there are indications of interference, replace the entire oil pump
assembly.
3. Check oil pump drive gear rotation.
ASSEMBLY
1. Install the oil seal to the oil pump drive gear.
