Accent GT Coupe L4-1495cc 1.5L DOHC MFI (1997)
2. Remove the front bearing using special tool (09432-21300) or equivalent.
3. Remove the inner ring, spacer, fourth gear, needle bearing, bearing sleeve, synchronizer rings, third and fourth gear synchronizer hub and sleeve
and third gear all together using special tool (09432-33200) or equivalent.
INSPECTION
Input Shaft
1. Check the outer surface of the input shaft where the needle bearing is mounted for damage or abnormal wear portion (A).
2. Check the splines for damage or wear.
Needle Bearing
1. Install the needle bearing on the shaft with the bearing sleeve and gear. Check that it rotates smoothly without abnormal noise or play.
2. Check the needle bearing cage for distortion.
Synchronizer Ring