Accent GT Coupe L4-1495cc 1.5L DOHC MFI (1997)
INSPECTION
Output Shaft
1. Check the outer surface of the output shaft where the needle bearing is mounted for damage or abnormal wear portion (A).
2. Check the splines for damage or wear.
Needle Bearing
1. Install the needle bearing on the shaft with the bearing sleeve and gear. Check that it rotates smoothly without abnormal noise or play.
2. Check the needle bearing cage for distortion.
Synchronizer Ring
1. Check the clutch gear teeth for damage.
2. Check the internal surface for damage,wear or broken grooves.
3. Push the synchronizer ring toward the clutch gear and check clearance "A". Replace if it is not within specifications.
Limit: 0.5 mm (0.02 inch).
