hyundai Workshop Repair Guides

Hyundai Workshop Service and Repair Manuals

Heated Glass Control Module|Testing and Inspection|Page 10471 > < Turn Signal Bulb|Specifications
Page 1
background image

Heated Glass Control Module: Testing and Inspection

REAR WINDOW HEATED TIMER

1. After removing the shroud under cover, remove the rear window heated timer.

2. Time specification

T1: MIN. 0.5 sec.
T2: 15 ± 3 min.

REAR DEFOGGER TIMER INSPECTION

If the heated switch is depressed while the ignition switch is ON, the heated timer operates for 15 ± 3 minutes.
Even while the heated timer is in operation, depressing the heated switch again or turning the ignition switch OFF, the heated timer operation will stop.
After tracing the proper operation.
If the system operates properly, the original heated timer is faulty.

Heated Glass Control Module|Testing and Inspection|Page 10471 > < Turn Signal Bulb|Specifications