Accent L L4-1495cc 1.5L SOHC MFI (2001)
1.
There are two arrow marks on the upper side of the front and rear cross member mounting bushings as shown in the photos.
2.
When installing the bushings into the crossmember inner pipe, align the arrow marks on the bushing with the lateral direction of the lateral
member.
NOTE:
Make sure the bushings are positioned parallel to the lateral member of the crossmember, and they do not deviate more than +/-3° from the lateral
direction of the lateral member when they are installed into the crossmember.
PARTS INFORMATION
The front and rear bushings can be identified by the inner diameter of the crossmember mounting bushing inner pipe.
Front: 16.5 mm diameter
Rear: 14.5 mm diameter