Accent L L4-1495cc 1.5L SOHC MFI (2001)
4. Depress the primary piston and install the retaining ring in the cylinder bore groove as illustrated.
5. Install the reservoir cap on the master cylinder.
6. Lubricate the two grommets (both, inside and outside) with genuine brake fluid and then insert them into the master cylinder body.
NOTE: Whenever the reservoir is replaced, the grommets must also be replaced.
7. Press the reservoir into the grommets with the fluid level indicator socket facing inboard. The reservoir should snap in place indicating that it is
secure as illustrated.
8. Connect the fluid level warning connector in the socket on the reservoir.
