Accent L L4-1495cc 1.5L SOHC MFI (2001)
1. Rotate the crankshaft in a counterclockwise direction to position of 90 degrees before top dead center as shown in the illustration.
NOTE: Make sure the valves are adjusted properly.
2. Measure the belt tension in the middle of the tension side of the belt using the tension gauge. (BORROUGHS BT-33-73F TYPE)
Tightening torque
Timing belt tension (in cool condition): 9.5 - 16.5 kg (20.9 - 36.4 lb.)
CAUTION:
1. Put arm on bottom of belt teeth. Put spindle on the middle of belt back surface.
2. Keep your hands off the indicator.
Timing Belt Tension Adjustment Procedure
The timing belt has an automatic tension adjusting mechanism.
Adjustment can be made using the following procedure:
1. Turn the steering wheel fully counter-clockwise.
2. Apply a wood block under the engine oil pan and carefully raise the engine.
CAUTION: Jack up the vehicle only slightly to prevent engine damage.
3. Remove the left engine mount bracket.
4. Remove the coolant pump pulley.
