hyundai Workshop Repair Guides

Hyundai Workshop Service and Repair Manuals

Evaporator Case|Removal and Installation|Page 9189 > < Evaporator Case|Removal and Installation
Page 2
background image

5. Remove the grommet cover from the dash panel. (2 screws)

6. Remove three of the glove box assembly bolts.

7. Disconnect the thermostatic switch connector.
8. Remove three of the evaporator mounting bolts (or nuts).
9. Remove the evaporator unit.

INSTALLATION

1. Installation is the reverse of removal.
2. If the evaporator unit is replaced with a new unit, add 40 cc of compressor oil to the compressor.
3. Evacuate, charge and test refrigeration system.

Evaporator Case|Removal and Installation|Page 9189 > < Evaporator Case|Removal and Installation