Accent L L4-1495cc 1.5L SOHC MFI (2001)
Coolant Line/Hose: Service and Repair
INSPECTION
1. Check the coolant pipes and hoses for cracks, damage, or restrictions.
2. Replace if necessary.
REASSEMBLY
1. Fit the O-ring in the groove provided at the coolant inlet pipe ends, wet the O-ring with coolant and insert into the coolant inlet pipe.
2. Make sure that there is a yellow mark on the inlet coolant hose and while keeping the yellow mark toward of the coolant inlet pipe, fit the hose to
the pipe to the end of the yellow mark.
NOTE:
1. Do not apply oil or grease to the coolant pipe O-ring.
2. Keep the coolant pipe connections free of sand, dust, etc.
3. Insert the coolant pipe fully into the coolant pump.
4. Do not reuse the O-ring but replace it with a new one.