Accent L L4-1495cc 1.5L SOHC MFI (2001)
Circuit Diagram
TROUBLESHOOTING HINTS
Open or short circuit is observed in idle air control system when ignition switch is turned on.
Using Hi-Scan
Harness Inspection Procedure
ACTUATOR INSPECTION
RESISTANCE MEASUREMENT BETWEEN TERMINALS
1. Disconnect the connector at the idle speed control actuator.
2. Measure the resistance between terminals.
Standard value
Terminal 1 and 2 : 16.6-18.6 ohm
Terminal 2 and 3 : 14.5-16.5 ohm <at 20 °C (68 °F)>
