Accent L L4-1495cc 1.5L SOHC MFI (2001)
^
It will be used during the Manual Update Procedure if the program does not download correctly.
^
If the Hi-Scan Pro does not download the program, use the Manual Update Procedure following this section.
^
Check the ECM IDs displayed on the HI-Scan Pro screen to verify that the correct ECM software is being downloaded. Refer to the "ECM
SPECIFICATION TABLE" for the ECM ID listing.
WARNING:
Do not interrupt the reprogramming at any time. The ECM will be rendered inoperative if the program does not download completely
10.
When the COMPLETED message is displayed, turn the Hi-Scan Pro OFF and the process is complete.
NOTE:
When the reprogramming is completed successfully, turn the ignition to the OFF position for 20 seconds and then start the engine.
Manual Update Procedure
NOTE:
In the menu option "01. LC 1.58 ACCELERATION (AUTO MODE)" fails to download the new ECM program, option "02. LC 1.58
ACCELERATION (ERROR MODE)" must be used.
1.
Turn the ignition to the ON position.
2.
Turn the Hi-Scan Pro ON and press Enter.
3.
Select menu option "07. LC 1.58 ACCELERATION" and press ENTER.
