Accent L L4-1495cc 1.5L SOHC MFI (2001)
Alignment: Service and Repair
Rear Wheel Alignment
REAR WHEEL ALIGNMENT
TOE-IN
Standard value mm (inch): 3 ± 2 mm 0.12 ± 0.079 inch
NOTE: The rear suspension arm (B) mounting bolt should be turned an equal amount on both sides when adjusting.
Inside of the vehicle: toe-in
Outside of the vehicle: toe-out
The scale has graduations of approximately 2.4 mm (0.09 inch)
(single side toe angle equivalent to 14')
CAUTION: The eccentric bolt should be adjusted within a 90° range left and right from the center position.
