Accent L L4-1495cc 1.5L SOHC MFI (2001)
8. Apply the specified oil to the entire surface of the O-ring and install it in the rack bushing.
9. Apply the specified grease to the rack teeth and wrap with vinyl tape.
Recommended grease: Multipurpose grease SAE J310, NLGI No.2
CAUTION: Do not plug the vent hole in the rack with grease.
10. insert the rack into the gear housing. Then, install the rack bushing and rack stopper.
11. Push in the rack stopper until the circlip groove of the rack stopper is aligned with the notched hole of the rack housing. Then, install the circlip
while turning the rack stopper.
CAUTION: The circlip should not be visible through the notched hole of the rack housing.
12. Using Special Tool (09432-21600), install the oil seal and the ball bearing in the valve body.
