Accent L L4-1495cc 1.5L SOHC MFI (2001)
NOTE The rear hub unit bearing should not be dismantled.
INSPECTION
1. Measure the rear hub bearing starting torque.
a. Install the rear hub assembly to the carrier spindle.
b. Tighten the flange nut to the specified torque.
c. Use a spring balance to measure the hub rotation starting torque.
Standard value: 3.2 kgf (7.0 lb.) or less
d. If the starting torque is out of standard value, re move the hub and inspect each parts.
2. Check the rear hub bearing for wear or damage.
3. Check the rear tone wheel for chipped teeth.
4. Check the hub inner surface for scoring
5. Check the carrier for cracks.
