Accent L L4-1495cc 1.5L SOHC MFI (2001)
7. Apply a light coat of body primer to the original sealant remaining around the window opening flange. The glass should be installed 10 minutes
after you apply the primer.
8. Pack adhesive into the cartridge avoiding air pockets, to ensure continuous application. Put the cartridge in a caulking gun or Sealant Gun, and run
a bead of adhesive around the edge of the glass.
NOTE: Apply the adhesive within 5 minutes after applying the glass primer.
9. Using suction cups or Special Tool, lower the glass over the opening, align it with the marks made in step 3 and set it down on the sealant.
10. Scrape or wipe excess adhesive off with a putty knife or gauze. Fill all cavities around the windshield glass.
11. Perform a water-leak test for the windshield. Use a cold water spray, being careful not to direct a powerful stream of water on the new adhesive
material. Allow water to spill over the edges of the glass.
12. If there are leaks, dry the affected area, then apply sealant.
NOTE
-
Let the car stand for at least four hours after windshield installation. If the car has to be used win thin the first 8 hours, it must be driven
slowly
-
keep the windshield dry for the first hour after installation.
