Accent L Hatch Back L4-1495cc 1.5L SOHC MFI (2000)
4. Glue the rubber dam to the inside surface of the rear window glass around the entire edge as shown, to contain the sealant during installation.
5. Install the rear window glass molding without any gaps.
6. Apply a light coat of glass primer to the outside of the dam.
NOTE:
1. Never touch the primed surfaces with your hand. If you do, the adhesive may not bond to the glass properly, causing a leak after the rear
window glass is installed.
2. Do not apply body primer to the glass.
3. Keep water, dust, and abrasive materials away from the primed surface.
